How To Handle A Simple Roof Leak

Roof leaks are annoying and it is imperative that you repair your roof the moment it starts dripping. Roofs leak due to various causes including gaps or cracks on the shingles, gaps along the chimney, flashing or vent.

Simple roof leaks can be repaired with ease and it is not really necessary to change the entire roof. You can either call in professional roof repair experts or do the job on your own by following a few simple instructions.

Materials you require for repairing roof leaks include nails, hammer, metal bristle brush, dry cloth, roofing cement, trowel, knife and patching fabric. Identify the problem areas by moving around your home and observing the roof for any tears or cracks. Mark the spots you think are problematic. Check the roof both from inside and outside. Mark the weak spots after carefully going over the flashing and vents for worn out cement pieces and cracks.

Attic is another place in your home you must check for water stains. Roof leaks can be identified if you go from here following the water trail. Start your roof repair with attributes such as flashings, chimney and vent. Clean the area around the cracks and pack with roofing cement.

The next step is to remove the roof shingles to patch the crack with cement before replacing it. Then look for rubber sheathing cracks and follow a similar procedure. In order to prevent any further leakage, be sure to pack in some extra cement.

If you find that roof leaks are caused by bubbles, blisters or wrapping on the roof sheathing, remove flaps to apply cement and then the patching fabric.